- Home
- Equipment
Refine by
Neue Herbold Environmental Equipment & Supplies
13 equipment items found
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
With the NEUE HERBOLD Profile Granulator of the LP series, it is possible for the size reduction of thick, long pipes and profiles. The horizontal feed allows the processing long profiles or pipes without deflection and without ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
To maintain the cell structure of the material to be shredded, the starting materials are crushed with a cross beater rotor without knife. This is in general a different working method as in size-reduction of ordinary plastics with a rotor with attached knives. The determination of the particle size is done by adjusting the spacing of the ridge and the selected screen ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
NEUE HERBOLD ZM series pulverizers are designed for the pulverizing of mid-hard, brittle to high impact plastics that require the final material to be in powder form. ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
The granulators of the SMV series are fitted with the known advantages of the double cross cutting process. The well constructed rotor stator blade system is the actual tool with which the power is increased considerably. The compact design of the granulator SMV is a clearly visible design feature, which allows flexible use with low space ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
The NEUE HERBOLD Granulators SX series are equipped with the double cross cutting technique. Both the rotating knives, as well as the stator blades in the mill housing are arranged to each other at an angle. This technique ensures a precise cutting gap over the entire working width and for a precise cut. The noise level is thereby significantly ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
Equipped with “double cross cutting geometry”, the cutting mill LM produces a cleaner and more uniform granulate. In the mill housing, the rotor blades, and the slanted opposite stator knives are angeled to each other. The operation of this double cross-section ensures precise cutting gap along the full working width. In addition to lower noise, the thermal load of the supplied ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
The rotors of the NEUE HERBOLD granulators type SM are equipped with double cross cutting technique. Both the rotating knives, as well as the stator blades in the mill housing are placed to each other at an angle. This technique ensures a targeted constant gap over the entire wide of the working surface and also ensures effective cutting. Simultaneously, the noise level is significantly ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
A slow-speed rotor shaft is the key feature of HZR series. The feed material is hydraulically conveyed to the cutting area of the rotor by a pusher. After reaching the end position, the pusher automatically moves back to the starting position. For a strong pulling power, a powerful drive with mounted hydraulic clutch is ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
A special characteristic of the two shaft shredder of the ZRM Series are the low-speed shafts. They can be driven electrically or hydraulically. The shafts overlap each other – thus ensure a quick size-reduction process. To optimize the material feeding, the shredder can be equipped with a hydraulic ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
The pre-wash screws has are specially designed to discharge forein bodies in the material and for moistening of the material with water. This is mainly used for the recycling of film for pre-treatment and for protection of the intensive ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
The capacity of the pipe shredder depends on the impact strength, the wall thickness of the tubes and the screen perforation. The output per working hour is up to 3 tons with a perfect state of cutting tools. The feed of the pipe shredder is from the side by a feeding tub in front of the ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
The NEUE HERBOLD Screw Shredder plants are equipped with pairs of similarly helicaly srew shafts. The breaking shafts are stored in a welded trough-shaped housing. For the separation of sand and soil, the housing can be equipped with a sieve bottom. The breaking of the feeding material works via shear forces both between the screw shafts and the counter teeth in the housing. The slide shafts are ...
Manufactured by:Neue Herbold Maschinen-und Anlagenbau GmbH based inSinsheim, GERMANY
The NEUE HERBOLD hammer mills series HM have versatile applications. At extremely high throughput rates, this series has been specially developed all brittle materials for the economical size ...